|
|
A. Anchor Installation Kit contains most necessary tools for installing your chain links fence with ground anchors.
B. If kit is not available:
1. Post hole digger or sledge hammer.
2. Wheelbarrow, shovel and hoe, for mixing concrete .
3. Tape measure.
4. Level.
5. Strong cord and stakes.
6. Pliers.
7. Fence stretcher(Block and tackle or ratchet type power pull).
8. 1/2" or 9/16" wrench.
9. Hackshaw or pipe cutter.
|
|
|
Set post 4" inside your property line to avoid encroaching on adjoining property. Use cord and stakes for laying out property lines and set posts 4" inside the cord.
ANCHOR INSTALLATION-Position Ground Anchor for Terminal Posts and Line Posts as shown in figure 1(See figure 3 for installation).
NOTE:Place post driving cap on post before using post driver to avoid distortion of post top.
CONCRETE INSTALLATION-Follow Step 1. Omit Ground Anchor.(See figure3 for installation). For depth of holes (See figure 3). |
|
|
|
|
|
For setting post in concrete mix as follows :1 part cement, 2 parts sand and 4 parts gravel. Mix a fairly heavy soloution as too much water weakens concrete and may cause cracking . Use a level to set post plumb.
|
|
|
|
